news

Gear motor deceleration method and corresponding equipment

update:2022-09-01
abstract:Literally, it seems to say that it's decreasing in number or size, and that's partly true. When rota...

Literally, it seems to say that it's decreasing in number or size, and that's partly true. When rotating equipment such as an engine or electric stepper motor requires a reduced output speed or increased torque. Well, gears are generally used for this task.
 
Gear "reduction" is used specifically to refer to the speed of rotating equipment. The rotational speed of the device is achieved by dividing by a rotational ratio greater than 1:1. This ratio comes into play as the smaller gears start to mesh and drive the larger gears.
 
Although in many scenarios gear reduction reduces speed and increases torque, in others, gear reduction is used to increase speed and reduce torque.
 
Under this demand, the generators of wind turbines use gear reduction to convert a relatively slow turbine page speed into a high-speed mode that increases power. In these applications, the assembled planetary gearbox is the exact opposite of that pattern of decreasing speed and increasing torque.

Recommand Products

ADF-I Ultra flat type Harmonic Drive Reducer

ADF-I Ultra flat type Harmonic Drive Reducer

Item No.: ADF-I-14-100 Installation easyCompact and simple design Outer diameter:75mmWeight:0.58KgMa...

More
Cheap Ultra-thin harmonic gear ADHD-I for robot arm

Cheap Ultra-thin harmonic gear ADHD-I for robot arm

Selling Units: Single itemSingle package size: 29X21X13 cmPackage Type: One Set of Harmonic Drive in...

More
Ultra-thin and hollow harmonic drive ADHD-III WITH LOW COST

Ultra-thin and hollow harmonic drive ADHD-III WITH LOW COST

Item No.: ADHD-14/17/20-III Brand Name: Arcsec Drive Place of Origin: zhejiang, China ADHD series' f...

More
ADH-I Hat type Harmonic Drive Reducer

ADH-I Hat type Harmonic Drive Reducer

Item number: ADH-I-14-100 Outer diameter:70mmWeight:0.39KgMax.Torque: 62.1NmRated Torque: 9NmOptiona...

More
ADH-III harmonic gearbox

ADH-III harmonic gearbox

Item No.: ADH-14/17/20/25/32/40-III hollow shaft harmonic drive popular used on CNC machine, industr...

More
China HOT SALE  harmonic reducer ADH-IV for robotics

China HOT SALE harmonic reducer ADH-IV for robotics

Item No.: ADH-14/17/20/25/32-IV ADH-IV:A combination product with shaft, which is easy to operateADH...

More
HIGH QUALITY Zero backlash harmonic drive ADH-V

HIGH QUALITY Zero backlash harmonic drive ADH-V

Size:14,17,20,25,32 Item No.: ADH-14/17/20/25/32-VADH-V:A simple combination product, the shaft size...

More
DURABLE Ultra-thin harmonic drive series ADSD-I

DURABLE Ultra-thin harmonic drive series ADSD-I

Item No.: ADSD-14/17-I Brand Name:Arcsec DriveMaterial: Iron, Stainless steelPlace of Origin:zhejian...

More
ADS-I Cup type Harmonic Drive Reducer

ADS-I Cup type Harmonic Drive Reducer

Item number: ADS-I-14-100  Outer diameter:73mm Weight:0.51Kg      Max.Torque: 62.1Nm     Rated Torqu...

More
China Manufacture Robot arm gearbox RV gearbox

China Manufacture Robot arm gearbox RV gearbox

Color: SilverType:RV SeriesPlace of Origin:zhejiang, ChinaBrand Name:Arcsec DriveApplicable Industri...

More
China High Precision Planetary Gearbox PL series WITH LOW COST

China High Precision Planetary Gearbox PL series WITH LOW COST

Item No.: PL01 planetary reducer used on robot arm cnc machine rotary table Output Torque: 48-160Inp...

More
THE HOT SALE Planetary gearbox PLF series for robotics

THE HOT SALE Planetary gearbox PLF series for robotics

Item No.: PLF01 Place of Origin: Zhejiang, ChinaBrand Name: Arcsec Drive Net Weight:  7.4 KG-9.8KGNo...

More
Contact Us