news

Precaution for arrangement of harmonic reducer

update:2022-04-12
abstract:During the use of the harmonic reducer, we should pay attention to various aspects, such as base typ...

During the use of the harmonic reducer, we should pay attention to various aspects, such as base type installation, flange type installation, torque arm installation, output shaft plus coupling, fit tolerance when connecting hollow shaft and solid shaft, bench holes, mounting bolts, etc.

1. For base type installation, the height of the center line should be calibrated, and the coaxiality of the two shafts should be calibrated when the coupling is connected; the floating amount of the flexible coupling should not exceed the allowable range of the coupling, and the rigid connection must ensure that each installation connection The shape and position tolerance of the long shaft connection also requires sufficient stiffness of the shaft.

2. Flange installation, the convex shoulder (or concave shoulder) should be well matched to avoid dislocation. When flange type installation and hollow shaft connection are used, the geometrical and position tolerance of the connection should be ensured.

3. To install the torsion arm, the active hollow shaft and the passive shaft should cooperate well, the floating of the passive shaft or the vibration of the equipment should be less than the allowable range of the elastic block, and the force arm should be fixed and locked.

4. When the output shaft adds a coupling, pulley, gear, sprocket, etc., do not hit hard, use the outer end of the output shaft screw hole, press-fit the coupling pulley, gear, sprocket, stirring type also need to consider the radial direction force.

5. When the hollow shaft is connected with the solid shaft, the tolerance H7.H6 should be coated with anti-rust oil.

6. Prepare a rigid foundation or a solid bench to install the transmission equipment. At the same time, it is also necessary to fully consider that even if the maximum load is added, the position of the assembled components will not be changed.

7. When installing the elevator, the hole on the table surface should be as small as possible under the precondition that the lead screw can pass easily.

8. The mounting bolts are generally grade 8.8. If there is high temperature or vibration and shock, please use the cylindrical pins to position them to avoid loosening.

Recommand Products

ADF-I Ultra flat type Harmonic Drive Reducer

ADF-I Ultra flat type Harmonic Drive Reducer

Item No.: ADF-I-14-100 Installation easyCompact and simple design Outer diameter:75mmWeight:0.58KgMa...

More
Cheap Ultra-thin harmonic gear ADHD-I for robot arm

Cheap Ultra-thin harmonic gear ADHD-I for robot arm

Selling Units: Single itemSingle package size: 29X21X13 cmPackage Type: One Set of Harmonic Drive in...

More
Ultra-thin and hollow harmonic drive ADHD-III WITH LOW COST

Ultra-thin and hollow harmonic drive ADHD-III WITH LOW COST

Item No.: ADHD-14/17/20-III Brand Name: Arcsec Drive Place of Origin: zhejiang, China ADHD series' f...

More
ADH-I Hat type Harmonic Drive Reducer

ADH-I Hat type Harmonic Drive Reducer

Item number: ADH-I-14-100 Outer diameter:70mmWeight:0.39KgMax.Torque: 62.1NmRated Torque: 9NmOptiona...

More
ADH-III harmonic gearbox

ADH-III harmonic gearbox

Item No.: ADH-14/17/20/25/32/40-III hollow shaft harmonic drive popular used on CNC machine, industr...

More
China HOT SALE  harmonic reducer ADH-IV for robotics

China HOT SALE harmonic reducer ADH-IV for robotics

Item No.: ADH-14/17/20/25/32-IV ADH-IV:A combination product with shaft, which is easy to operateADH...

More
HIGH QUALITY Zero backlash harmonic drive ADH-V

HIGH QUALITY Zero backlash harmonic drive ADH-V

Size:14,17,20,25,32 Item No.: ADH-14/17/20/25/32-VADH-V:A simple combination product, the shaft size...

More
DURABLE Ultra-thin harmonic drive series ADSD-I

DURABLE Ultra-thin harmonic drive series ADSD-I

Item No.: ADSD-14/17-I Brand Name:Arcsec DriveMaterial: Iron, Stainless steelPlace of Origin:zhejian...

More
ADS-I Cup type Harmonic Drive Reducer

ADS-I Cup type Harmonic Drive Reducer

Item number: ADS-I-14-100  Outer diameter:73mm Weight:0.51Kg      Max.Torque: 62.1Nm     Rated Torqu...

More
China Manufacture Robot arm gearbox RV gearbox

China Manufacture Robot arm gearbox RV gearbox

Color: SilverType:RV SeriesPlace of Origin:zhejiang, ChinaBrand Name:Arcsec DriveApplicable Industri...

More
China High Precision Planetary Gearbox PL series WITH LOW COST

China High Precision Planetary Gearbox PL series WITH LOW COST

Item No.: PL01 planetary reducer used on robot arm cnc machine rotary table Output Torque: 48-160Inp...

More
THE HOT SALE Planetary gearbox PLF series for robotics

THE HOT SALE Planetary gearbox PLF series for robotics

Item No.: PLF01 Place of Origin: Zhejiang, ChinaBrand Name: Arcsec Drive Net Weight:  7.4 KG-9.8KGNo...

More
Contact Us