What are the common faults of harmonic reducer bearings?

What are the common faults of harmonic reducer bearings?

Causes and solutions of common faults in harmonic reducer bearings:
1. Reason: The bearing precision of the harmonic reducer is low.
Solution: Use high-precision Baina harmonic reducer bearings.
2. Reason: The spindle is bent or the box hole is not concentric.
Solution: Repair the spindle or box.
3. Reason: The belt is too tight. Solution:
Adjust the belt to make it tight.
4. Reason: Poor lubrication of the bearings of the harmonic reducer.
Solution: Use the grease of the specified brand and clean it properly.
5. Reason: low assembly quality.
Solution: Improve assembly quality.
6. Reason: The inner and outer shells of the bearings of the harmonic reducer run in circles.
Solution: Replace the bearing and related wear parts of the harmonic reducer.
7. Reason: The axial force is too large.
Solution: Clean and adjust the sealing ring gap between 0.2mm and 0.3mm, and verify the static balance value.
8. Reason: The bearing of the harmonic reducer is damaged.
Solution: Replace the bearing.

Zhejiang Qiyue Mechanical Technology Co.,ltd. is your complete source for gear reducers, actuator,rotary table, robot arm, and other innovative products used in automation technology.With one of the largest product offerings in the motion control industry as well as the engineering expertise and manufacturing capabilities to provide customized solutions, Arcsec Drive can help with your application.

Web:
ADD ： Ganlin Industry Zone, Shengzhou, Zhejiang, China